Description
(1) New SANY America Telehandler model STH1056A (10,000lb Capacity) with all
Sandard equipment Enclosed Cab and Open Canopy available
Dimensions:
• Maximum Lift Height 56’ 2” 17.13 m
• Maximum Forward Reach 42’ 11” 13.08 m
• Height, Stowed 8’ 5” 2.56 m
• Length, Stowed (without Forks) 20’ 7” 6.28 m
• Width 8’ 6” 2.59 m
• Wheelbase 11’ 5” 3.49 m
• Ground Clearance (Center) 1’ 6” 0.46 m
• Ground Clearance (Axle) 1’ 6” 0.45 m
• Weight 33,290 lbs 15,100 kg
Capacities:
• Power 121 hp 90 kW
• Torque 360 lbf-ft 488 Nm
• Electrical System 24 volt
• Hydraulic Tank Capacity 33 gal 124 L
• Hydraulic System Capacity (with Tank) 42 gal 159 L
• Fuel Tank Capacity 36 gal 135 L
Components:
• Engine Deutz TCD3.6
• Transmission Dana VDT12000
• Axles F/R Dana 223 / 213
• Hydraulic Pump Kawasaki Load Sense Piston Pump
• Hydraulic Manifold Parker
• Exhaust aftertreatment (DPF+SCR (DEF required))
PowerTrain:
• Powershift transmission
• Planetary limited slip axles
• Full-time 4 wheel drive
• Gear selector lever (Steering-column)
• Manual shift
• Service brake, 4-wheel, wet-disc, spring applied, hydraulic release
• Parking brake, same as service brake
• Cushioned solid tires
Hydraulic:
• Full variable load-sensing system
• Single electric over hydraulic joystick controls
• Axial piston pump
• Hydraulic quick coupler lines for auxiliary hydraulics
• Self-leveling forks
• Three driver-selectable steering modes (2W, 4W, 4W-Crab)
Cabin:
• ISO certified ROPS/FOPS Canopy
• Emergency hammer (closed cabin only)
• Rubber isolated cab mounts
• Fully enclosed cab with automatic heat and air conditioning
• camer s Digital instrument display
• Mechanical suspension seat
• Seat belt, 3 inch retractable
• Dual armrests
• Rear-view camera
• 2-speed fan
• Dedicated display for rear-view
Electrical:
• 24v electrical system
• 2-12 volt batterie
Productivity:
• Back up camera
• Reverse sensing system
• Full 4-wheel fender package
• LED work lights on cab and boom
• Flashing beacon
• Lifting hook
• Frame leveling 10 degrees side to side
• Rear-Axle stabilization system
• Axle-mounted front stabilizers
Performance:
• Maximum Lift Capacity 10,000 lbs 4 536 kg
• Lift Capacity at Maximum Height 5,000 lbs 2 268 kg
• Lift Capacity at Maximum Reach 3,000 lbs 1 361 kg
• Boom (Raise/Lower) 14 seconds / 11 seconds
• Boom (Extend/Retract) 16 seconds / 15 seconds
• Frame Leveling +/- 10 degrees
• Maximum Drive Speed 17 mph 28 kph
• Outside Turning Radius (4WS) 14’ 1” 4.30 m
• Auxiliary Hydraulic Flow 17 gpm 63 L/min
• Auxiliary Hydraulic Pressure 2,466 psi 17 MPa
• Standard Tire Size 14.00-24
• Warranty 3-Year or 3,000 hour “whichever comes first” Factory Warranty
Options:
• 60” Carriages
• Forks 60”
Enclosed Cab avaliableSpecifications
Year2026
ManufacturerSANY
ModelSTH1056A
ConditionNew
Hours0
Lift Capacity10,000 lb
Max Forward Reach42 ft
Maximum Lift Height56 ft
Operating Weight33,290 lb
OutriggersYes
Number of Outriggers2
Auxiliary HydraulicsYes
CouplerYes
Quick AttachYes
Carriage TypeTilt
Frame Leveling/TiltYes
ROPSOpen
FendersYes
Number of Fenders4
MonitorYes
Suspension SeatYes
Drive4WD
Max Travel Speed Empty20 mph
Transmission TypePowershift
Number of Speeds4
Horsepower130 HP
Engine ManufacturerCUMMINS
Engine ModelQSF3.8
Engine TierUSA Tier 4 Final
Year2026|
ManufacturerSANY|
ModelSTH1056A|
ConditionNew|
Hours0|
Lift Capacity10,000 lb|
Max Forward Reach42 ft|
Maximum Lift Height56 ft|
Operating Weight33,290 lb|
OutriggersYes|
Number of Outriggers2|
Auxiliary HydraulicsYes|
CouplerYes|
Quick AttachYes|
Carriage TypeTilt|
Frame Leveling/TiltYes|
ROPSOpen|
FendersYes|
Number of Fenders4|
MonitorYes|
Suspension SeatYes|
Drive4WD|
Max Travel Speed Empty20 mph|
Transmission TypePowershift|
Number of Speeds4|
Horsepower130 HP|
Engine ManufacturerCUMMINS|
Engine ModelQSF3.8|
Engine TierUSA Tier 4 Final|
